That's great news

---AutoMerged DoublePost---

So tried to start truck today and I am getting no base oil pressure is that A sign of A bad LOO or something worse?

 

First thing I would do is drain the oil and run a magnet through it to see what type and how much steel debris is in it. The most likely cause of an LPOP failure is something going through it. Most mechanics will remove front cover to inspect it. By draining the oil you can find out if you lost a lifter or something. It can save some labor charges.

 

if it is the lpop can I change myself or does it have 2 be a mechanic job? and if it is the lpop what kinda money am I looking at for parts or A kit?

 

Since I don't know your experience or abilities, it's hard to say if you can do it yourself. My guess would be, yes, if you are on the forum BUT if debris went through your LPOP that means something else came apart which could mean an engine replacement. Cross your fingers!

 

that is no joke I am going to take the cover off in the next couple of days and drain the oil at the same time so lets hope for the best I will update on my findings