Ford Powerstroke 03-07 6.0L Discussion of 6.0 Liter Ford Powerstroke Turbo Diesels

ford f250 shut down need help

Thread Tools
 
Search this Thread
 
Old Jul 21, 2013 | 01:18 PM
  #1  
dwood35's Avatar
Thread Starter
|
Newbie
Joined: Jul 2013
Posts: 2
Likes: 0
ATTN ford f250 shut down need help

I have an 05 f250 6.0 started noticeing didn't have as much power as it used to was pulling my horse trailer down the interstate felt a hiccup in the pedal then the truck shut down and went into limp mode shut it off sat there for bout fifteen minutes then it started back up drove off ok but this happened three more time before I got it home no warning light came on at all had it put on a computer and only code that came up was low circuit egr fault now when you gas it t try an pass someone it will runrpm bout 3000 won't shift and goes into limp mode replaced the ficm bout year ago need help asap don't no wee to start
 
Reply
Old Jul 21, 2013 | 05:28 PM
  #2  
bobfbigman's Avatar
Diesel Bomber
Joined: Nov 2009
Posts: 1,942
Likes: 144
Default

I would start by pulling the EGR valve and giving it a good cleaning, check to make sure the Orings are still in good shape. Have you replaced the STC fitting on the HPOP yet? you will want to do that soon as it will fail you in the future, it can/will cause a hot no start condition and finally will get so bad it won't run. standpipes and dummy plugs should be replaced at some point too.
 
Reply
Old Jul 21, 2013 | 05:41 PM
  #3  
dwood35's Avatar
Thread Starter
|
Newbie
Joined: Jul 2013
Posts: 2
Likes: 0
Default

Did pull the egr valve out and cleaned it it was stuck the stc fitting don't no what that is would bad fuel filters cause a problem like this
 
Reply
Old Jul 21, 2013 | 07:27 PM
  #4  
bobfbigman's Avatar
Diesel Bomber
Joined: Nov 2009
Posts: 1,942
Likes: 144
Default

Yes clogged fuel filters will definitely cause it to run like crap, they should be changed every 15k.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post




All times are GMT -5. The time now is 10:31 PM.