no codes, rough idle, stalls
#1
no codes, rough idle, stalls
i have a 2006 e350 6.0l
recently bought used.
has been running fine for a couple of months now
a few weeks ago it threw a p0299 code at me as well as the EP code so i cleaned the EP sensor and the tube.
this week the truck idles rough, has almost no power and threw codes (3 or 4 of them)associated with the ICP sensor
got home to look in bible and find sensor. the ICP sensor was not properly connected so i clipped it back on.
the truck isnt giving me any codes but the power and stalling issues persist
what should i check next?
Nick
recently bought used.
has been running fine for a couple of months now
a few weeks ago it threw a p0299 code at me as well as the EP code so i cleaned the EP sensor and the tube.
this week the truck idles rough, has almost no power and threw codes (3 or 4 of them)associated with the ICP sensor
got home to look in bible and find sensor. the ICP sensor was not properly connected so i clipped it back on.
the truck isnt giving me any codes but the power and stalling issues persist
what should i check next?
Nick
#2
The reason the ICP was disconnected was because the sensor is bad and it will run better with it unplugged but it won't run its best. I would start by replacing the ICP sensor and then cleaning the EGR valve, a clogged egr valve can hang up and cause poor power and can make it take forever to spool up
Thread
Thread Starter
Forum
Replies
Last Post
cdetterer
5.9 Liter CR Dodge Cummins 03-07
4
01-21-2015 10:47 AM
99stackedpowerstroke
Ford Powerstroke 03-07 6.0L
7
10-08-2014 07:06 PM