Ford Powerstroke 03-07 6.0L Discussion of 6.0 Liter Ford Powerstroke Turbo Diesels

Long cranks before starting

Old Sep 12, 2012 | 04:46 PM
  #1  
Strokinandsmokin's Avatar
Thread Starter
|
Newbie
Joined: Sep 2012
Posts: 5
Likes: 0
Default Long cranks before starting

Hey guys I've got an 06 f-350 all stock except afe stage 3 intake and mbrp turbo back exhaust. Every time I go to start I wait for the light to go out and crank her over it takes between 5-10 secs to start the truck. I change my oil and fuel filters every 5-8 thousand miles. I'm new to powerstrokes so does anybody know what it could be? Or point me in the right direction. Trucks got 141k on the clock
 
Reply
Old Sep 13, 2012 | 01:22 AM
  #2  
ntmdtr3fan's Avatar
Diesel Enthusiast
Joined: Jul 2010
Posts: 228
Likes: 17
From: Walnut Creek, ca
Default

Have you checked your batteries and tested your FICM? Have the batteries load tested. If one is bad replace both as the other will fail shortly after the first. The FICM test procedure is a sticky above in the 6.0 section. 4 to 7 seconds is my average on my truck. Longer when its colder and faster when its warmed up.
 
Reply
Old Sep 13, 2012 | 07:39 AM
  #3  
Mdub707's Avatar
BOMBARDIER
Joined: Oct 2007
Posts: 8,208
Likes: 630
Default

Exactly what he said. Except 4-7 seconds sounds like a VERY long time to me too. Mine fires in less than 2 seconds when I start cranking, no matter how warm or cold it is.
 
Reply
Old Sep 13, 2012 | 09:19 AM
  #4  
Strokinandsmokin's Avatar
Thread Starter
|
Newbie
Joined: Sep 2012
Posts: 5
Likes: 0
Default

Mine used to start in about 2-3 seconds no matter what the temperature was but something has changed. It still runs fine but I've lost fuel MPG's too but I just put a leveling kit and 35's on the truck so I figured the bigger tires was prob most of my fuel issue.
 
Reply
Old Sep 13, 2012 | 12:34 PM
  #5  
Mdub707's Avatar
BOMBARDIER
Joined: Oct 2007
Posts: 8,208
Likes: 630
Default

Well like was already mentioned, you should take your batteries out and have them load tested, and then test your FICM.
 
Reply
Old Sep 13, 2012 | 01:45 PM
  #6  
Strokinandsmokin's Avatar
Thread Starter
|
Newbie
Joined: Sep 2012
Posts: 5
Likes: 0
Default

Will do. I read the sticky a little it looks pretty straight forward.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GasItOut
12 Valve 2nd Gen Dodge Cummins 94-98
35
Jul 22, 2015 01:11 PM
hurriedcoyte
Diesel In Distress - Support Ticket
3
Jun 19, 2015 06:26 AM
dandbmcc
Ford Powerstroke 03-07 6.0L
5
Mar 14, 2015 11:05 PM
cutthroatxxx
General Diesel Related
0
Dec 14, 2014 08:15 PM
weatherby
99-03 7.3L Performance
5
Nov 5, 2014 10:45 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:34 AM.