2000 Ford Excursion 4x4 - Door Lock Actuator Installation

 

I replaced just the mechanical part and reused the electrical part, still worked fine
It was great and only cost $40.00

 

Mine locks fine but will not unlock, it slowly went one by one. After checking around, I bought all four actuators, replaced the driver and passenger side first and nothing! I gave up. Do I need to replace all of them to work?? Or could it be the relay switches I keep hearing about but nobody seems to know where they are located!! Any help will be appreciated. It's a long reach to unlock them doors!

 

so all of the doors on my 00 PSD F350 act the same way, sluggish to unlock and will not lock. are there 4 actuators, 1 in each door and they are all faulty?

 

yes, I just recently fixed all four of mine 2 months ago. they work like a charm now.

 

sweet, i need to fix my front passenger door, thanks for all the tips

 

hey so i am trying to get the actuator out of the door still and there's the rod with the threads on it in the clip and i cant get the clip to come off I tried using a screwdriver and the hook thing came off but the rod wont budge, any ideas?

 

they are tough but should all just pop off. I had to use something to help in pushing the plastic things off the rods.

 

thanks, i got it off and put the foil on the thingamabob and now it works like new now i get to use the keyless entry again

 

i will be replacing mine this weekend, thanks for the response