Low Voltage to TPS
#1
Low Voltage to TPS
My OD light has been on and my tach only works when cranking. the tach sensor is new/good. I checked the TPS and I only am getting .44v input so I only get .14v at idle and .38v at WOT. What would cause low voltage to the TPS?
I also tried pulling codes but when I ground out the STI and hook my test light up to the STO to positive, WOT, turn the key on, the light never flashers and it just acts like it usually does on start up.
I also tried pulling codes but when I ground out the STI and hook my test light up to the STO to positive, WOT, turn the key on, the light never flashers and it just acts like it usually does on start up.
Thread
Thread Starter
Forum
Replies
Last Post
john grossman
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
01-12-2019 08:58 PM
Saams69
5.9 Liter CR Dodge Cummins 03-07
5
07-20-2015 11:21 PM
Big _red _cummins
24 Valve 2nd Gen Dodge Cummins 98.5-02
2
11-17-2014 02:44 PM