Low Voltage to TPS
 

My OD light has been on and my tach only works when cranking. the tach sensor is new/good. I checked the TPS and I only am getting .44v input so I only get .14v at idle and .38v at WOT. What would cause low voltage to the TPS?

I also tried pulling codes but when I ground out the STI and hook my test light up to the STO to positive, WOT, turn the key on, the light never flashers and it just acts like it usually does on start up.

the TPS should be set to about .9 or 1 at idle and like 3.4 at WOT, im having the same problem but i have not checked mine yet

Yea I know what it should be set at but I'm not getting the proper 5v to the TPS to begin with...

Well i cant help ya there sorry