Ford 83-94 6.9 and 7.3L General Discussion of 83-94 6.9 and 7.3 Liter Ford Diesels

dana 61 noises

Thread Tools
 
Search this Thread
 
  #1  
Old 05-05-2011, 10:19 AM
scottknight7's Avatar
Newbie
Thread Starter
Join Date: May 2011
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default dana 61 noises

I have an 84 6.9 4x2 with a dana 61 read end. When I shift I get a thunk like a bad u-joint, but all the u-joints are very solid with zero play. Also, under load (primarily in 1st and 2nd) I get a clicking noise. I laid under the truck with a friend rocking 1st to reverse and the thunk appears to be in the diff. The yoke has nominal rotational play and no in/out or up/down play and the diff has oil. Any idea's?? Daily driver that tows a 3k lbs trailer.
 
  #2  
Old 05-05-2011, 01:32 PM
DieselCrawler's Avatar
Diesel Bomber
Join Date: Sep 2009
Posts: 2,492
Received 167 Likes on 140 Posts
Default

could be play in the spider gears or the cross pin. pop the cover off and take a peek.
 
  #3  
Old 05-05-2011, 10:09 PM
scottknight7's Avatar
Newbie
Thread Starter
Join Date: May 2011
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

I got under it to check the yoke nut and the rear u-joint was stiff and chunky. It wasn't lube-able so I replaced it and everything seems OK. The bearings were really dry, and it had no zerk. I like the $15 fixes.

Thanks for the input.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
woodsman27
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
05-23-2015 10:16 AM
tractormandan
Wanted To Buy (WTB) - Used
0
05-09-2015 08:44 AM
scrnnmssuck
For Sale
1
03-20-2015 11:55 AM
KYLEBOY
Dodge Truck and Cummins Turbo Diesel Forum
0
01-18-2015 06:36 PM
gyayo2012
12 Valve 2nd Gen Dodge Cummins 94-98
7
11-15-2014 08:11 PM



Quick Reply: dana 61 noises



All times are GMT -5. The time now is 06:24 AM.