Ford 83-94 6.9 and 7.3L General Discussion of 83-94 6.9 and 7.3 Liter Ford Diesels

injectors are in!

Old Aug 14, 2010 | 10:08 AM
  #11  
yvillanz's Avatar
Thread Starter
|
Diesel Fan
Joined: Jun 2010
Posts: 42
Likes: 0
From: alongallegheny river
Default

would the timing make my truck smoke if it was off?
 
Reply
Old Aug 16, 2010 | 10:27 PM
  #12  
Sycostang67's Avatar
Diesel Wrench
Joined: May 2009
Posts: 826
Likes: 62
From: Kuna, ID
Default

Yes.
 
Reply
Old Aug 18, 2010 | 11:53 AM
  #13  
yvillanz's Avatar
Thread Starter
|
Diesel Fan
Joined: Jun 2010
Posts: 42
Likes: 0
From: alongallegheny river
Default

they seemed to help but it is still smoking ill put a vid on here of it

---AutoMerged DoublePost---

Yfrog Video : yfrog.com/1qexhsmokez

video of the smoke.......
 

Last edited by yvillanz; Aug 18, 2010 at 11:53 AM. Reason: Automerged Doublepost
Reply
Old Aug 18, 2010 | 06:08 PM
  #14  
DieselCrawler's Avatar
Diesel Bomber
Joined: Sep 2009
Posts: 2,492
Likes: 167
Default

where did u get the injectors from? almost looks like one is not spraying fuel, just dumping it in. was that cold or hot engine?
 
Reply
Old Aug 18, 2010 | 06:45 PM
  #15  
yvillanz's Avatar
Thread Starter
|
Diesel Fan
Joined: Jun 2010
Posts: 42
Likes: 0
From: alongallegheny river
Default

New Delphi
Cold engine
 
Reply
Old Aug 18, 2010 | 07:56 PM
  #16  
DieselCrawler's Avatar
Diesel Bomber
Joined: Sep 2009
Posts: 2,492
Likes: 167
Default

ok yes they are delphi's. but where did u order them from?
 
Reply
Old Aug 18, 2010 | 11:37 PM
  #17  
Sycostang67's Avatar
Diesel Wrench
Joined: May 2009
Posts: 826
Likes: 62
From: Kuna, ID
Default

I would agree that it appears you may have a bad injector due to the puffing. When my timing was off, the smoke was very steady.
 
Reply
Old Aug 19, 2010 | 10:21 AM
  #18  
yvillanz's Avatar
Thread Starter
|
Diesel Fan
Joined: Jun 2010
Posts: 42
Likes: 0
From: alongallegheny river
Default

Accurite diesel
 
Reply
Old Aug 19, 2010 | 11:11 AM
  #19  
coalrollin12v's Avatar
Diesel Fan
Joined: May 2009
Posts: 75
Likes: 0
From: mt airy md
Default

i found g-code delphis (reman) for 23 a piece is that a good price?

and whats the difference between the g-code and bb-code
 
Reply
Old Aug 19, 2010 | 11:12 AM
  #20  
DieselCrawler's Avatar
Diesel Bomber
Joined: Sep 2009
Posts: 2,492
Likes: 167
Default

start the engine, and start loosing and tighting each injector line untill smoke goes away. do one cyl at a time. that will tell u what injector it is. just loosen the nut on the line going into the injector while it is running at idle. some fuel will squirt out, but the injector will not fire then.

bb are the best all around injector. g codes are for turboed versions. but most with turbos run the bb's
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:24 AM.