Installing pyro in wrong spot? - Diesel Bombers



Ford 83-94 6.9 and 7.3L General Discussion of 83-94 6.9 and 7.3 Liter Ford Diesels

Reply
 
 
 
LinkBack Thread Tools Search this Thread
  #1  
Old 04-14-2017, 01:07 PM
Justin bennett's Avatar
Newbie
Thread Starter
 
Join Date: Apr 2017
Location: New Jersey
Posts: 1
Default Installing pyro in wrong spot?

Hello I just installed a pyro in my 89 7.3 idi n/a. I installed the probe on the drives side in the middle of the manifold. After driving it it idles at 400 and really doesn't move up much driving unless I step on the pedal or give her a good go then I could get up to 950 or so. Is this right? Would the readings not read till a lot higher rpms?
Attached Thumbnails
Installing pyro in wrong spot?-img_1639.jpg  
Reply With Quote
  #2  
Old 06-08-2017, 01:49 AM
Sycostang67's Avatar
Diesel Wrench
 
Join Date: May 2009
Location: Kuna, ID
Posts: 825
Default

It shouldn't move a whole lot if your pump is stock. Try climbing a hill, that should get it moving. Don't let it get past 1200, pistons start melting.
Reply With Quote
 
 
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -5. The time now is 04:21 PM.