Gears in the rear
#14
Any ideas what to look for? It's pretty bare out here in Arizona. At least in my part of the valley it is
---AutoMerged DoublePost---
The 8x165 won't fit these older trucks will they
---AutoMerged DoublePost---
dumb question, just realized they are the same
---AutoMerged DoublePost---
The 8x165 won't fit these older trucks will they
---AutoMerged DoublePost---
dumb question, just realized they are the same
Last edited by Dortiz; 02-18-2014 at 05:54 PM. Reason: Automerged Doublepost
The following users liked this post:
hobbieman (02-18-2014)
#15
I think the Bolt pattern is the same. Cause my barge is 16.6 and they fit my f350.
---AutoMerged DoublePost---
I mean 16.5
---AutoMerged DoublePost---
No worries. Them alcoa's are hard 2 find, unless u buy new
---AutoMerged DoublePost---
I mean 16.5
---AutoMerged DoublePost---
No worries. Them alcoa's are hard 2 find, unless u buy new
Last edited by hobbieman; 02-18-2014 at 07:26 PM. Reason: Automerged Doublepost
The following users liked this post:
Dortiz (02-18-2014)
#16
#18
I need those tires just cuz they say big foot...tires on my bigfoot are older than me an dry rotted...still has perfect tread though
Sent from my SCH-I605 using Tapatalk
---AutoMerged DoublePost---
Have 3.55s in my rig but they were installed at the factory so Cnt tell ya anything accept she'll pull a 50 ft boat and run at 60mph@ 1.1k 70-80mph 2.1-2.3k up or downhill
Sent from my SCH-I605 using Tapatalk
Sent from my SCH-I605 using Tapatalk
---AutoMerged DoublePost---
Have 3.55s in my rig but they were installed at the factory so Cnt tell ya anything accept she'll pull a 50 ft boat and run at 60mph@ 1.1k 70-80mph 2.1-2.3k up or downhill
Sent from my SCH-I605 using Tapatalk
Last edited by kendawg69a; 02-19-2014 at 01:37 PM. Reason: Automerged Doublepost
The following users liked this post:
hobbieman (02-21-2014)
#19
Sounds like a pretty good range, currently with the 4.10s I don't go over 65mph cause it will have me at 2k+ , and I get my best mileage at 60mph with 1.8k
---AutoMerged DoublePost---
Those are some nice looking wheels though, found some nice looking Alcoas for 200 for the set, but they are for 8x170
---AutoMerged DoublePost---
Those are some nice looking wheels though, found some nice looking Alcoas for 200 for the set, but they are for 8x170
Last edited by Dortiz; 02-19-2014 at 07:20 PM. Reason: Automerged Doublepost
The following users liked this post:
hobbieman (02-21-2014)