Ford 83-94 6.9 and 7.3L General Discussion of 83-94 6.9 and 7.3 Liter Ford Diesels

Need advice on 93 f-250

Thread Tools
 
Search this Thread
 
  #1  
Old 03-27-2013, 01:16 AM
daves93f250's Avatar
Diesel Fan
Thread Starter
Join Date: Mar 2013
Location: Los Angeles,CA
Posts: 41
Received 2 Likes on 2 Posts
Default Need advice on 93 f-250

Hello everyone, I'm new to diesel trucks and don't know much about them other than what I've read here. So I'm looking at a 1993 f-250 xtra cab 4x4 7.3 non turbo w/225k. It looks to be in really good condition for the year. I'll try to post pics. Paint looks great, body is straight, has a lift kit, not sure what size and brand new 20" XD rims with 38" tires which apparently are kinda wasted. oh almost forgot it has a sound system which I don't really care, but the guy kept on telling me about it . Bad news is that the 4x4 doesn't work because its missing the hub lockers only, but everything else works. I told my buddy since he's a mechanic and knows all about these trucks and he said it would cost $100 for just the locking hubs, that's if all the inside works whatever that is. Anyways the guy was asking $3850 for the truck, but I talked to him and told him that if it runs as good as he was telling me, then the most I could give him was $3300 and he said ok. Usually I wouldn't negotiate over the phone but he's in San Diego close to the border, which is about 2 hours away from me. So I'm going over this Friday to check it out and I'm taking my buddy to take a look at it and give me his opinion on it. So knowing all this what do you guys think. Is it a good deal? I'm worried about the mileage, but my buddy says these trucks can last thousands of miles that is if you take care of the truck and keep up on maintenance. Also what kind of mpg will I be getting highway and street? Any other things that these trucks are known for like parts that aren't built right or maybe things that I should replace or anything like that? Any advice will be greatly appreciated.
 
  #2  
Old 03-27-2013, 07:01 AM
12251hd's Avatar
Diesel Fan
Join Date: Sep 2012
Posts: 13
Likes: 0
Received 1 Like on 1 Post
Default

If it runs OK, price is reasonable. Engine is bullet-proof. Tranny might need careful look w/ mileage and tires. Wouldn't be surprised if lift and injector pumps are on final leg. Anything rubber needs careful inspection--probably cracked, unless already replaced. Most everything can be fixed by weekend wrench. Good luck.
 
The following users liked this post:
daves93f250 (03-27-2013)
  #3  
Old 03-27-2013, 01:06 PM
Powerstrokin7.3's Avatar
Diesel Fan
Join Date: Dec 2012
Location: OHIO
Posts: 72
Likes: 0
Received 2 Likes on 2 Posts
Default

Pretty much everything he said above ^ and yes price isn't bad is bullet proof engine but you might be disappointed in the power if that's what your looking for otherwise these will last 500,000 plus if properly cared for.
 
The following users liked this post:
daves93f250 (03-27-2013)
  #4  
Old 03-27-2013, 06:35 PM
daves93f250's Avatar
Diesel Fan
Thread Starter
Join Date: Mar 2013
Location: Los Angeles,CA
Posts: 41
Received 2 Likes on 2 Posts
Default

ok ill ask to see if the tranny has had any work done or has been replaced. As far as power goes I'm happy with what it is, I'm not trying to race or anything like that. Just need it to load up my dirtbike's and occasional trailer with sandrail. Also was wondering I want to put a single stack on it, but ive heard of people saying since its a non-turbo it has to be a certain size? Something about damaging your drive-train or valves. Do you guys know anything about this.
 
  #5  
Old 03-28-2013, 06:28 AM
autostroker's Avatar
Diesel Enthusiast
Join Date: Jan 2013
Location: iowa
Posts: 188
Likes: 0
Received 9 Likes on 8 Posts
Default

i had a 6.9 non turbo, ran dual exhaust back behind the cab with 18 inch glass packs, and stacks up behind the cab, was loud, but worked great, if you are going into one stack, be sure it is big enough to not cause backpressure and raise the EGT's too high, that will burn valves.
 
The following users liked this post:
daves93f250 (03-28-2013)
  #6  
Old 03-28-2013, 08:47 PM
daves93f250's Avatar
Diesel Fan
Thread Starter
Join Date: Mar 2013
Location: Los Angeles,CA
Posts: 41
Received 2 Likes on 2 Posts
Default

So what size stack should be good.
 
  #7  
Old 04-01-2013, 06:17 AM
autostroker's Avatar
Diesel Enthusiast
Join Date: Jan 2013
Location: iowa
Posts: 188
Likes: 0
Received 9 Likes on 8 Posts
Default

3.5 or 4 inch should be plenty
 
  #8  
Old 04-03-2013, 01:25 PM
Powerstrokin7.3's Avatar
Diesel Fan
Join Date: Dec 2012
Location: OHIO
Posts: 72
Likes: 0
Received 2 Likes on 2 Posts
Default

I have a 3 down pipe straight piped and it has adapters going to a 7in stack sounds good and good egt
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
brianj2077
General Diesel Related
3
08-04-2015 09:06 PM
Spaky6.0mudder
Ford Powerstroke 03-07 6.0L
7
08-03-2015 08:54 PM
GHETTO_PIZZA
Ford Powerstroke 03-07 6.0L
3
04-09-2015 10:48 AM
twm011
Ford Powerstroke 99-03 7.3L
1
02-24-2015 09:11 AM
Diesel Bombers
Latest Automotive Industry News
0
02-18-2015 02:40 PM



Quick Reply: Need advice on 93 f-250



All times are GMT -5. The time now is 02:21 AM.