6.9 help
#1
6.9 help
This is for a buddy of mine. The truck is an '83 F-250 4x4, all stock except a Bank's turbo kit with exhaust.
He's been having heat issues in the cab for a few months. He recently replaced the t-stat due to engine temp reading low. Now, the cab blows warm, but still has low engine temp. These are the readings taken:
Heater hoses going into cab: 130
Rad hose, top of engine: 140
Read hose, top of rad: 138
Lower Rad hose, at rad: 57
Lower rad hose at engine connection: 89
Outside temp when readings taken: 12
Any ideas? He wonders if there is a second t-stat. I'm a PSD guy, and have only messed with IDI injection systems. Any input or guidance would be appreciated.
He's been having heat issues in the cab for a few months. He recently replaced the t-stat due to engine temp reading low. Now, the cab blows warm, but still has low engine temp. These are the readings taken:
Heater hoses going into cab: 130
Rad hose, top of engine: 140
Read hose, top of rad: 138
Lower Rad hose, at rad: 57
Lower rad hose at engine connection: 89
Outside temp when readings taken: 12
Any ideas? He wonders if there is a second t-stat. I'm a PSD guy, and have only messed with IDI injection systems. Any input or guidance would be appreciated.
#2
Thread
Thread Starter
Forum
Replies
Last Post
greasesheik
Diesel In Distress - Support Ticket
2
04-09-2015 09:33 PM
tumble72
Ford 83-94 6.9 and 7.3L General
8
11-27-2014 10:31 PM
tumble72
Ford 83-94 6.9 and 7.3L General
1
11-10-2014 08:41 PM