Testing help
#1
#3
#4
#5
Ohm glowplugs less than one ohm is a good plug
glowplug control unit test is using a 12 volt test light.
connect to test connection on unit (it is the the post on the relay that has a strap running down to the base of the unit) the other end of test light is of course to ground. Make sure that you can see the light from the drivers seat and turn on the ignition.
The light times depend on the temperature of the glowplug timer.
35 degrees to -20 degrees F dash light should be on 5 to 15 seconds and the test light should be on 15 to 70 seconds. The test light in the 15 to 70 seconds will have a steady on time and a flashing time. Both these happen in the 15 to 70 seconds. If you have any other questions feel free to message me on here.
glowplug control unit test is using a 12 volt test light.
connect to test connection on unit (it is the the post on the relay that has a strap running down to the base of the unit) the other end of test light is of course to ground. Make sure that you can see the light from the drivers seat and turn on the ignition.
The light times depend on the temperature of the glowplug timer.
35 degrees to -20 degrees F dash light should be on 5 to 15 seconds and the test light should be on 15 to 70 seconds. The test light in the 15 to 70 seconds will have a steady on time and a flashing time. Both these happen in the 15 to 70 seconds. If you have any other questions feel free to message me on here.
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
Latest Automotive Industry News
0
09-29-2015 12:50 PM
Diesel Bombers
Latest Automotive Industry News
0
08-23-2015 06:10 PM
Diesel Bombers
Latest Automotive Industry News
0
07-08-2015 05:50 PM
Diesel Bombers
Latest Automotive Industry News
0
02-16-2015 02:00 PM
Diesel Bombers
Latest Automotive Industry News
0
01-20-2015 03:01 AM