I have a Ruenel Front Bumper on my 02' 2nd Gen. I would like to install the PIAA 510 Fog Lights in the bumper using the stock fog light circuit. The stock lights are 37 watts vs the PIAA's at 55 watts. Could I make this work without melting all the wires for my head/fog lights? Has anyone else already done this?
TIA

 

here ya go. i think you'll be fine on the wiring with the bigger lamps. they shouldn't draw more amperage than the stcok wiring can handle.


and welcome to the site!! pop in to the introductions and tell us a little about yourself and you ride.

 

Thanks for the quick reply. I do not know what the wiring looks like on the PIAA lights, but I was hoping to cut the connectors off the stock lights and splicing them onto the PIAA's so I will have a quick connect coupler in case I have to take the bumper off.