will a tranny out of a 93 dodge cummins bolt up to a 95 motor without haveing to change the adapter or no

 

most of the bells housings on a 6BT dodge truck engine have the same SAE #.

I would think so, not sure.

there are 3 types of flywheel housings, SAE #1, SAE#2, AND SAE #3 , but then you have a SAE#1 with a SAE #1 and SAE #2 starter and SAE #2 has the same, SAE #3 is used in marine applications.

 

No, it won't work. The 518 non lock up in the 93 has a smaller converter, and uses a thinner adapter plate. The later lock up units are about an inch thicker in the adapter.