drop fuel tank or pull the bed?
#11
The following users liked this post:
Jet A Fuel (09-21-2009)
#12
ive done it both ways, if youre gonna pull the bed what i finally figured out that its easiest to loosen the bolts on the bed on the right side almost all the way loose and then remove the ones on the left side of the truck and jack the bed up enough to give you the needed room. like i said ive done it 5 times total, 3 times on my grandfathers 99 and 2 times on mine. pulling the bed aint that bad.
The following users liked this post:
Jet A Fuel (09-21-2009)
#13
I dropped the tank on mine the first time. Still got the 1/4 tank issue and followed all kinds of directions. So I decided to get another draw straw and have this one in the fuel module itself. So the second time, I loosened the bolts on the passenger side, and removed the bolts from the drivers side. Used a bottle neck jack and some wood and tilted the bed far enough to do what I had to do. It seemed alot easier to me than dropping the tank. I say tilt the bed.
The following users liked this post:
Jet A Fuel (09-21-2009)
#14
The following users liked this post:
Jet A Fuel (09-23-2009)
Thread
Thread Starter
Forum
Replies
Last Post
Jet A Fuel
Tech Article Submission
0
06-05-2015 03:28 PM
RatsMC
Chevy/GMC 6.2L and 6.5L
19
05-04-2015 05:25 PM