Check this out.. It seems to apply to mostly the 06 and up trucks, but I would check your truck if its a 3rd gen. This could save you a lot of headache time. It has to do with the starter wire rubbing on a bracket near the drivers side, close to the starter. I checked my 04.5 and there was no bracket, and it wasn't a problem. Check it out here:
http://www.dieseltruckresource.com/d...d.php?t=158327

Scott

 

Good info, I will check this out after work on Thursday.

06 DIESEL

 

Thanks Scott for thhe heads up.
I will be checking min tomorow.

 

No problem guys. It appears to be mostly an 06-present problem. Most people just tuck the wire into the loom and its all good.
Scott

 

This may be long after the original post, but thank you for the heads up. I will check this after work tomorrow.
This is a fine site, only problem is, I not getting much done around the house or at work...........oh, but I am not complaining!

 

Thanks for the bump I forgot to check mine, now I have something to do after work Friday.

 

Never too late for a bump. Very useful info.

 

Thanks for the info, I will check mine out as well....

 

Glad this was somewhat useful to you guys.. Hope its not a problem for ya'll.
Scott

 

Anyone have issues on the pre 06 trucks?

I will check my Dads tommorow.

There was a similar problem with the second gen V10s, but I caught mine before it got too bad.