3rd gen owners... check your truck!
Check this out.. It seems to apply to mostly the 06 and up trucks, but I would check your truck if its a 3rd gen. This could save you a lot of headache time. It has to do with the starter wire rubbing on a bracket near the drivers side, close to the starter. I checked my 04.5 and there was no bracket, and it wasn't a problem. Check it out here:
http://www.dieseltruckresource.com/d...d.php?t=158327 Scott |
Good info, I will check this out after work on Thursday.
06 DIESEL |
Thanks Scott for thhe heads up.
I will be checking min tomorow. |
No problem guys. It appears to be mostly an 06-present problem. Most people just tuck the wire into the loom and its all good.
Scott |
This may be long after the original post, but thank you for the heads up. I will check this after work tomorrow.
This is a fine site, only problem is, I not getting much done around the house or at work...........oh, but I am not complaining! |
Thanks for the bump I forgot to check mine, now I have something to do after work Friday.
|
Never too late for a bump. Very useful info.
|
Thanks for the info, I will check mine out as well....
|
Glad this was somewhat useful to you guys.. Hope its not a problem for ya'll.
Scott |
Anyone have issues on the pre 06 trucks?
I will check my Dads tommorow. There was a similar problem with the second gen V10s, but I caught mine before it got too bad. |
All times are GMT -5. The time now is 02:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands