dodge help
#1
#2
The truck jumpin like that is probably accompanied by a cluncking noise and this sounds like a worn U joint on the drive shaft. Just crawl under there and twist that shaft back n forth to see if there is any play in the ends.
The other, don't have a clue. I'm strictly a hand shaker tranny man myself.
The other, don't have a clue. I'm strictly a hand shaker tranny man myself.
#3
Some other things you might check would be your pinion nut on the rear axle, the transmission mount, as well as making sure the bellhousing bolts are tight. any or all the above will make it clunk. I'd also check the ujoints like Uncle Bubba suggested.
The shifting problem almost sounds like the converter is locking up too soon. Can you feel it shift through each gear, or does it shift one time and then lug?
JB
The shifting problem almost sounds like the converter is locking up too soon. Can you feel it shift through each gear, or does it shift one time and then lug?
JB
#4
#5
#7
Back to your truck. You U joints on both front wheel hubs and both ends of the front and rear driveshafts. The driveshaft ones are generally the problem with these systems.
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
Latest Automotive Industry News
0
05-07-2015 02:50 PM
Diesel Bombers
Latest Automotive Industry News
0
12-12-2014 12:30 PM
Diesel Bombers
Latest Automotive Industry News
0
11-16-2014 06:10 PM
Diesel Bombers
General Diesel Related
0
11-03-2014 08:10 AM