Front End Rebuild
#111
06-10-2010, 10:08 AM
If those bolts come out it's kindergarten project. be sure to mark where they are turned to so you can set the new ones close to the same for a starting reference point.
#113
06-18-2010, 05:33 PM
Diesel Wrench
Update;
Changed the upper control arms, front springs and drag links.
I bought the Carrier Springs Heavy Duty Springs; HUGE improvement over the stock springs.
Maxx Link Drag links; 1225L from Geno's Garage.
Stock upper control arms (smoking deal on ebay).
Waiting on bushings from Bajabomber for the new Lower Control Arms he built for me.
Job was pretty straight forward; took about 4 hours with a hoist.
Changed the upper control arms, front springs and drag links.
I bought the Carrier Springs Heavy Duty Springs; HUGE improvement over the stock springs.
Maxx Link Drag links; 1225L from Geno's Garage.
Stock upper control arms (smoking deal on ebay).
Waiting on bushings from Bajabomber for the new Lower Control Arms he built for me.
Job was pretty straight forward; took about 4 hours with a hoist.
Thread
Thread Starter
Forum
Replies
Last Post
