Injectors
#2
No. Couple reasons why. First the injector line nut is teh wrong thread, 2nd the pop pressure is off and finally the spray pattern is not perfect. You can put 2nd gen nozzles on 1st gen bodies and reset the pop pressure to work with teh VE but you still have a funny spray pattern.
#8
I was under the impression that the spray angles were different on the 94 up trucks. I read that everywhere.
#10
The DSLA number designates the spray angle:
'89-91 DSLA155 P104 4x0.014"
'91-93 DSLA145 P265 6x0.010"
'94-98 DSLA145 P464 5x0.009"
'96-98 DSLA145 P477 5x0.010"
This should clear up the confusion.
'89-91 DSLA155 P104 4x0.014"
'91-93 DSLA145 P265 6x0.010"
'94-98 DSLA145 P464 5x0.009"
'96-98 DSLA145 P477 5x0.010"
This should clear up the confusion.
Last edited by Uncle Bubba; 11-29-2009 at 12:58 PM.