Dipricol Optix Gauge Install
Newbie
Joined: Apr 2008
Posts: 1
Likes: 0
Well I installed my A Pillar Pod I won here on the DB 
(thanks DM and Upstate Diesel Performance) I installed Dipricol Optix White face gauges Boost, Fuel pressure, and Pyro. I first ran all the wires and boost hose to make sure I had enough.
The thermocouple was a chore because of where i mounted my Bmk 11, thank God for a 90 degree drill adapter.
Next I put on the fuel pressure sensor wasn't to bad I couldnt get the hose to seat all the way but all three barbs are in the hose with a hose clamp. I thought that was sufficient.
Next I removed a bolt and installed the supplied boost bolt and hose with supplied fittings.
This is what it looks like finished.
What do yall think?
(thanks DM and Upstate Diesel Performance) I installed Dipricol Optix White face gauges Boost, Fuel pressure, and Pyro. I first ran all the wires and boost hose to make sure I had enough.The thermocouple was a chore because of where i mounted my Bmk 11, thank God for a 90 degree drill adapter.
Next I put on the fuel pressure sensor wasn't to bad I couldnt get the hose to seat all the way but all three barbs are in the hose with a hose clamp. I thought that was sufficient.
Next I removed a bolt and installed the supplied boost bolt and hose with supplied fittings.
This is what it looks like finished.
What do yall think?
BOMBARDIER
Joined: Mar 2007
Posts: 23,293
Likes: 1,322
From: North of You
Vulcan Performance Home Page has every fitting you could ever need.
Yup just talk to Eric..... he will hook ya up just mention Luke from Diesel Dawgs
BOMBARDIER
Joined: Mar 2007
Posts: 23,293
Likes: 1,322
From: North of You
