Dipricol Optix Gauge Install
The following users liked this post:
Redpatcher0481 (04-08-2008)
#15
The following users liked this post:
Redpatcher0481 (04-13-2008)
#16
Well I installed my A Pillar Pod I won here on the DB (thanks DM and Upstate Diesel Performance) I installed Dipricol Optix White face gauges Boost, Fuel pressure, and Pyro. I first ran all the wires and boost hose to make sure I had enough.
The thermocouple was a chore because of where i mounted my Bmk 11, thank God for a 90 degree drill adapter.
Next I put on the fuel pressure sensor wasn't to bad I couldnt get the hose to seat all the way but all three barbs are in the hose with a hose clamp. I thought that was sufficient.
Next I removed a bolt and installed the supplied boost bolt and hose with supplied fittings.
This is what it looks like finished.
What do yall think?
The thermocouple was a chore because of where i mounted my Bmk 11, thank God for a 90 degree drill adapter.
Next I put on the fuel pressure sensor wasn't to bad I couldnt get the hose to seat all the way but all three barbs are in the hose with a hose clamp. I thought that was sufficient.
Next I removed a bolt and installed the supplied boost bolt and hose with supplied fittings.
This is what it looks like finished.
What do yall think?
#17
you can usually piece one together at a hardware store with brass fittings. i did that with mine, i used brass fittings from orielly's and it worked fine.
#19
Vulcan Performance Home Page has every fitting you could ever need.
Yup just talk to Eric..... he will hook ya up just mention Luke from Diesel Dawgs