1990 12 valve p pump conversion.
#1
1990 12 valve p pump conversion.
Ive been doing a lot of searching about the p pump conversion. I havent found anything about the 94-98 injectors working in the 1990 head. Also, wondering if the stock power steering pump and vacuum pump off the 90 will bolt up to the 94-98 timing gear housing. Those are the main questions i have about it right now. Not sure what year of P7100 pump i have, but i believe its the 180hp pump. I was told 1997. The last three numbers on the pump in the serial number are 911. I also have the injectors, fuel lines, pump to block bracket, pump gear, return lines. I still need the timing gear housing and cover, anything else? Thanks for any help at all!
Sent from my Motorola Electrify using Tapatalk 2
Sent from my Motorola Electrify using Tapatalk 2
#2
the injectors will work you just have to use the copper washer/sleeve and have the pop pressure changed. the ps and vac pump will bolt up fine. yes you have a 180 pump from a 96-98 auto trans truck if it is a 911 pump. sounds like your in good shape just find you a housing with the tin cover
#3
Would i be better off trying to find a head from a 94-98? I see the non i/c engine is 9mm and the i/c is 7mm, so you have to run spacers. Does anyone make an injector nozzle for the 94-98 to put on the 90 injectors. I would really like to upgrade the injectors also, but wondering if it would be easier to just switch out the head? Thanks
Sent from my Motorola Electrify using Tapatalk 2
Sent from my Motorola Electrify using Tapatalk 2
#4