Diesel Engine Conversions Diesel Engine Swaps , 4bt Diesel and All Diesel Engine Conversion Related Discussions

Mercedes 300d 5cyl turbo swap

Thread Tools
 
Search this Thread
 
  #1  
Old 08-16-2010, 01:34 PM
jeep-dsl's Avatar
Diesel Fan
Thread Starter
Join Date: Aug 2010
Location: Newville, PA
Posts: 70
Likes: 0
Received 9 Likes on 8 Posts
Default Mercedes 300d 5cyl turbo swap

Was very inspired by mercedes to wrangler swaps on website. Just purchased 84 300d to swap into a wrangler. Engine and trans now out of car. Any helpfull hints would be greatly appreciated. thanks jeep-dsl.
 
  #2  
Old 08-22-2010, 10:05 PM
jeep-dsl's Avatar
Diesel Fan
Thread Starter
Join Date: Aug 2010
Location: Newville, PA
Posts: 70
Likes: 0
Received 9 Likes on 8 Posts
Default

This weekend we bought the 95 YJ Wrangler with blown 6 cylinder to do the mercedes 617 turbo diesel swap. Engine is now out and working on the 1st adapter for flywheel.
 
  #3  
Old 08-22-2010, 10:48 PM
Rustin's Avatar
Diesel Wrench
Join Date: Feb 2010
Location: Redding CA.
Posts: 934
Received 56 Likes on 42 Posts
Default

I have no info for you. I thought it would be wrong of me not to post. Just make good measurments, which I am sure you already have. Excellent Idea never heard of anyone doing that. Just so you know those power-plants have very good Mpg on the highway. some have been able to do well over 75 and still get close to 30 mpg. when you start the mods for more power and efficentcy I would starrt with the Pistons. look at the way the fuel has eched a path on them. The preinjection chamber I would leave alone. The piston is the area to look at for now. The Pumps are euro boch and are capeable of 3200psi in stock form.
 
  #4  
Old 08-24-2010, 07:29 AM
Join Date: May 2008
Location: Denver, CO
Posts: 310
Received 10 Likes on 9 Posts
Default

Originally Posted by Rustin
some have been able to do well over 75 and still get close to 30 mpg.
Very rarely. Mid-20's is more accurate.

when you start the mods for more power and efficentcy I would starrt with the Pistons.
Thats the very last place to even consider touching.

look at the way the fuel has eched a path on them.
That is not an etch, its part of the casting.
 
The following users liked this post:
Rustin (08-24-2010)
  #5  
Old 08-24-2010, 10:33 AM
Horns's Avatar
Diesel Enthusiast
Join Date: Aug 2010
Location: Waterloo, Iowa
Posts: 161
Received 19 Likes on 15 Posts
Default

I don't have any experince with any of the mercede's diesels but I hear that one is a pretty good engine. If you really want a lot of info start searching around www.4btswaps.com They have a complete section on the mecerdes engines.
 
  #6  
Old 08-24-2010, 12:19 PM
FTE's Avatar
FTE
FTE is offline
Diesel Wrench
Join Date: Dec 2009
Location: Vancouver Wa
Posts: 730
Received 33 Likes on 31 Posts
Default

Just be careful with the ballance of the flywheel when swapping. The factory ballanced each motor individually as a complete assembly, making the finall adjustments for ballance on the flywheel. So each flywheel has different ballance. Make sure you mark the position of the flywheel to crank (the hole spacing is even) so you can match the ballance of your new flywheel. You should be happy with the performance of the stock motor in the jeep so long as you have the valves adj. properly, free flow exhaust,egr delete, cold air intake, good injectors and the correct gearing (around 411 depending on the tire size) good luck!
 
  #7  
Old 08-24-2010, 12:39 PM
Rustin's Avatar
Diesel Wrench
Join Date: Feb 2010
Location: Redding CA.
Posts: 934
Received 56 Likes on 42 Posts
Default

Originally Posted by ForcedInduction
Very rarely. Mid-20's is more accurate. (I did say Some. Rustin)


Thats the very last place to even consider touching. (your probably right. I have seen to much and have gone info happy the wrong direction. Rustin)


That is not an etch, its part of the casting. (Hold on now. I am talking about how the fuel creats an etching (well more like cleans a path) over the casting, kinda like a star pattern that a cummins or Dmax makes when you over fuel or advance fuel timing. My appologies for not being more clear and less vague. I was trying to get him to ask questions. then let the info fly. Rustin)
Do what you need to do man. nothing to hold you back with your jeep. alot of info. Have fun.
 

Last edited by Rustin; 08-24-2010 at 12:49 PM.
  #8  
Old 08-24-2010, 07:11 PM
Join Date: May 2008
Location: Denver, CO
Posts: 310
Received 10 Likes on 9 Posts
Default

Originally Posted by Horns
If you really want a lot of info start searching around 4btchops.com They have a complete section on the mecerdes engines.
A very poor section with no experienced members.
This is a far better resource: superturbodiesel.com - tuning performance turbo diesel mercedes, W123, W116 and up. OM617, OM60X

The factory ballanced each motor individually as a complete assembly, making the finall adjustments for ballance on the flywheel.
Rarely. Most flywheels are neutrally balanced. Still, care should be taken to make sure its not one of the 1/10 that isn't.

cold air intake
One is already installed as stock equipment.
 

Last edited by ForcedInduction; 08-24-2010 at 07:13 PM.
  #9  
Old 08-24-2010, 08:28 PM
Benzer1's Avatar
Diesel Enthusiast
Join Date: Sep 2009
Location: Illinois
Posts: 153
Received 2 Likes on 2 Posts
Default Mercedes Jeep

Check out the threads by Vlado, FTE, and myself. The 5 cyl Benz swap is not that bad. The engine is the perfect size for a Wagoneer/Cherokee IMHO...............

John
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
straight six mafia
Mercedes
0
08-21-2015 10:19 AM
swelbe
5.9 Liter CR Dodge Cummins 03-07
1
04-07-2015 01:08 AM
n2brk
6.7 Liter Dodge Cummins 07.5-12
4
02-21-2015 09:05 AM
diesel fit her
Diesel Bombers Introduction
3
11-13-2014 02:43 PM
GreenDieselF
24 Valve 2nd Gen Dodge Cummins 98.5-02
2
10-20-2014 02:05 PM



Quick Reply: Mercedes 300d 5cyl turbo swap



All times are GMT -5. The time now is 05:33 PM.