Ok ,I am moving on the project again i just had another obstacle solved and found a 14" 2 disc pull type clutch I was wanting a single disc but they don't make one I guess I should have talked to Murf it looks like he had the same problem and I aslo spent almost 700.00 anyhow I will be getting it running this week and will be mounting the cab for the last time I cant wait to get it going, more pictures soon.

 

What is your intended use for the truck,is it going to work every day cross country hauling?

 

I am going to make a shed hauler out of it I have a Topkick now and am wanting something a little smaller .

 

Sweet project dude!

 

I have started on it again. i am going to get it finished by the end of next month I have the 2 disc clutch in it and the shifter mounted in the truck I have searched alot looking for info on the intercooler mounting for the chevy trucks and have found some info, so i will try to document everything i do to install it.

I have over a inch of space between the dodge fan clutch but i will be removing it and installing a electric clutch fan

This is how far off the dodge fan is I will fix it with the electric clutch


The left clutch pedal is out of a Kodiak truck and bolts in the place of the hyd clutch

 

Glad to see it coming along again

 

More pictures coming

 

Ok I have more info on the inter-cooler fitting the truck I cut out for the cooler to fit inside the core support and i moved the radiator towards the motor about 1/2" in order to get my a.c condenser in the same location from the factory the only thing i need to do is notch the inter-cooler where i marked it in blue in order for the lights to fit without cutting .








---AutoMerged DoublePost---

Here is the Compressor Gov .I had to move it from the compressor because there was no room. the 3 lines are one to the compressor one to the air tank one to the air dryer.

 

SWEEEEETTTTTT

 

here is a few more pictures still not done yet.