92 F-350 Cummins swap
#11
Thanks for the post's guy. Im just going to take it one step at a time. I am going to get the mounts from fordcumins.com. And then ill just set the motor in for awhile and save some money to buy a wiring harness. Painless makes one dont they guys?. Thanks again for the replys
Keep it simple and get a 12v because it lacks wiring.
Even if it is a 24v, its not that bad, the way I'm getting around it is by putting all the Dodge wiring harness in my Ford, along with the Dodge gauge cluster.
#12
#13
Wiring harness? Are you going to put a 24v or CR in it?
Keep it simple and get a 12v because it lacks wiring.
Even if it is a 24v, its not that bad, the way I'm getting around it is by putting all the Dodge wiring harness in my Ford, along with the Dodge gauge cluster.
Keep it simple and get a 12v because it lacks wiring.
Even if it is a 24v, its not that bad, the way I'm getting around it is by putting all the Dodge wiring harness in my Ford, along with the Dodge gauge cluster.
#14
#15
i got a 10 dollar roll of solder in my swap. and one roll of red and one roll of black wire. thats it. the best part is everything is 100% color coded to the wiring diagrams for the trucks
#16