Just another Fummins with lots of pics!
#11
#12
#13
Hung the front fenders and grill and light support
Will possibly be running fans in front of the I/C
Tore out the factory gauge cluster area and most the under the dash wiring. Plan is to run a Dodge gauge cluster instead.
Then today I started building my core support since the original one wasnt going to work
Fender mount
Custom plumbing will be a must
Will have to make my own intake horn also so that it points in the right direction
Will possibly be running fans in front of the I/C
Tore out the factory gauge cluster area and most the under the dash wiring. Plan is to run a Dodge gauge cluster instead.
Then today I started building my core support since the original one wasnt going to work
Fender mount
Custom plumbing will be a must
Will have to make my own intake horn also so that it points in the right direction
#16
#17
#19
Sometime next spring, the Fummins is priority because I need something to drive and a tow rig to pull the Dodge in the first place.
Made some hood stops the other day
Last nite I pulled the timing cover and luckily I have the updated housing as far as I can tell. Cleaned all the blow by oil off and got a new crank seal installed, will be reinstalling the cover later this afternoon.
Made some hood stops the other day
Last nite I pulled the timing cover and luckily I have the updated housing as far as I can tell. Cleaned all the blow by oil off and got a new crank seal installed, will be reinstalling the cover later this afternoon.
Last edited by bajabomber87; 11-25-2009 at 12:40 PM.
#20