Diesel Engine Conversions Diesel Engine Swaps , 4bt Diesel and All Diesel Engine Conversion Related Discussions

1947 Ford 1.5 Ton 'Heavy' W/ A Cummins

Thread Tools
 
Search this Thread
 
Old May 13, 2011 | 09:05 PM
  #201  
47Ford - 1.5Ton's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Jul 2008
Posts: 110
Likes: 16
From: Green Bay, WI
Default

**BRAND NEW***!!!!!!

brand new zero hours, never been run AIR COOLED HOLSET single cylinder air compressor with drive thru package (for power steering)

This one puts out 8.5 CFM compared to the TF 550 at 13 CFM.... but after my scare where the compressor head ALMOST poured the entire engine coolant capacity into the engine oil pan..... I've HAD it with liquid cooled compressors..... especially used ones...

So... found this one..... which should more then enough pump the air I need (hell still double my shop air compressor)....

it is B-E-A-U-tiful.... love new parts

old on right, new on left..... alot smaller...all the same size fittings and everything so works out great.....


Brand spankin new


Drive thru package installed

The LUK will bolt right up to this bad boy.....

Ooopsies....
A5000 fuller plunger shattered......the cause of the rear range transmission shifting without waiting until a pass thru the neutral zone.......



Shes fixed now and working like a charm!

The new Holset EL850 air compressor plumbed in....


The air pump even pumps air !


The full cycle from 0 psi to 120 psi took about 2 minutes to fill approx 13 gallons....

Mostly idle with a few bounces on the throttle.....

Heres to videos of that beautiful turbo whistle (wow is the HE341 distinct and different on a 12V) and
the bendix air dryer with holset compressor in action......


 
Reply
Old May 13, 2011 | 09:07 PM
  #202  
mkriebs's Avatar
Diesel Wrench
Joined: Mar 2010
Posts: 512
Likes: 22
Default

Nice! Where did you pick that up at?! Would love to have that bad boy!
 
Reply
Old May 15, 2011 | 05:21 PM
  #203  
47Ford - 1.5Ton's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Jul 2008
Posts: 110
Likes: 16
From: Green Bay, WI
Default

Well.....

Its in.... permanently now..... grade 8 hardware, painted, loctite 242, all welded up..........









The much improved over previous design panhard bar mount on axle...... this one isnt going anywhere......





All for now..... hydroboost comes in sometime this week.....

Plans for the week are to get the top side shock mounting welded in, get the rear air bags installed, and maybe start the air solenoid valve mounting and plumbing..... Also will start mock up for pedals once I get the hydroboost mounted next week....

Moving right along.....

~M
 
Reply
Old May 15, 2011 | 06:44 PM
  #204  
93_Fummins's Avatar
Diesel Wrench
Joined: Aug 2009
Posts: 501
Likes: 49
From: Duncan, Oklahoma
Default

Where did you pick up the compressor? I'd like to swap my liqued cooled compressor out for a smaller air cooled unit too...
 
Reply
Old May 15, 2011 | 07:25 PM
  #205  
47Ford - 1.5Ton's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Jul 2008
Posts: 110
Likes: 16
From: Green Bay, WI
Default

Originally Posted by 93_Fummins
Where did you pick up the compressor? I'd like to swap my liqued cooled compressor out for a smaller air cooled unit too...
Found mine from a truck parts website.... but I see ebay has one or two on there brand new as well for under $350 shippped....which is definately worth it.....
 
Reply
Old May 23, 2011 | 07:48 AM
  #206  
knoberman's Avatar
Diesel Fan
Joined: Nov 2009
Posts: 13
Likes: 2
From: Mid mo
Default

Awsome build! Now for my only concern based on problems ive had I will now use nothing but fleetguard filters anything else ive had messed with my oil presure. I just got mine put back together (toasted thrust) when I fired it up my pressure kept fluctuating until I went to my case ih dealer and got a filter (fleetguard) after a little research I found others who have had the same problem so I try to pass it on good luck with the project ill b watchin.
 
Reply
Old May 23, 2011 | 06:03 PM
  #207  
47Ford - 1.5Ton's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Jul 2008
Posts: 110
Likes: 16
From: Green Bay, WI
Default

Originally Posted by knoberman
Awsome build! Now for my only concern based on problems ive had I will now use nothing but fleetguard filters anything else ive had messed with my oil presure. I just got mine put back together (toasted thrust) when I fired it up my pressure kept fluctuating until I went to my case ih dealer and got a filter (fleetguard) after a little research I found others who have had the same problem so I try to pass it on good luck with the project ill b watchin.

Don't be fooled by the frams..... only as space savers... I fun nothing but fleetguard, and/or baldwin / CAT filters...... I replaced with NAPA Golds for engine testing.... and already have the new baldwin fuel and CAT Oil filters for the motor once it becomes a driver...
 
Reply
Old May 23, 2011 | 06:10 PM
  #208  
knoberman's Avatar
Diesel Fan
Joined: Nov 2009
Posts: 13
Likes: 2
From: Mid mo
Default

Got ya I even had trouble with the napa gold (wix) nothing else available without goin out of town or order somewhere till I remembered case ih were fleetguard
 
Reply
Old May 24, 2011 | 09:23 PM
  #209  
47Ford - 1.5Ton's Avatar
Thread Starter
|
Diesel Enthusiast
Joined: Jul 2008
Posts: 110
Likes: 16
From: Green Bay, WI
Default

New toys.....

2005 F350 6.0L hydroboost unit for the 1947...........looks real nice and clean/complete..... plus the large bore size and resevior size to boot.....

 
Reply
Old Jun 15, 2011 | 09:52 PM
  #210  
Apmcrx's Avatar
Diesel Enthusiast
Joined: Aug 2010
Posts: 139
Likes: 4
From: Tally/FWB/P-cola, FL
Default

I love these updates!
 
Reply



All times are GMT -5. The time now is 03:40 AM.