|
98 s10 ext cab v2203 700r4 4x4 sas
https://cimg3.ibsrv.net/gimg/www.die...9406637d74.jpg
I have been collecting parts for a while and working on the bell housing adapter I am about ready to start on the truck itself I will try and get some pictures of the bell housing and flexplate adapter up soon https://cimg0.ibsrv.net/gimg/www.die...eaaa981af7.jpg https://cimg6.ibsrv.net/gimg/www.die...3a7723d076.jpg https://cimg9.ibsrv.net/gimg/www.die...2322c32df1.jpg https://cimg7.ibsrv.net/gimg/www.die...124af7a9ea.jpg |
Looking good. Good to see another swap come up
|
yeah a new Kubota conversion. I am a little lost. is that a Kubota flywheel? with the center section filled? with the crank adapter? and then then the crank adapter on the aft side of the flywheel to take the GM flexplate?
looks good though keep the updates coming |
I should have taken pictures when it was apart the adapter is actually a piece of Chevy crankshaft cut off and cut with a shoulder and pressed into the Kubota flywheel then I drilled it
|
Here is a picture of the whole thing put together just waiting on a new flexplate
https://cimg1.ibsrv.net/gimg/www.die...50c1b73dad.jpg |
Cool! It'll be interesting to see how the 4x4 and 700r4 work out. Should be fine. :tu:
|
Here is the truck and the bumper I'm building for it
https://cimg2.ibsrv.net/gimg/www.die...2dc9877ed4.jpg https://cimg0.ibsrv.net/gimg/www.die...836797b368.jpg |
Looking good! I did a similar setup with the flywheel adapter bolted to the Kubota flywheel in a Cherokee with an AW4 auto. It worked great. Don't forget to bump the timing up and stiffer gov spring while you have it out. It a lot easier now, removing all the shims from under the ip gives it @ 11deg.
|
Originally Posted by FTE
(Post 1111535)
Looking good! I did a similar setup with the flywheel adapter bolted to the Kubota flywheel in a Cherokee with an AW4 auto. It worked great. Don't forget to bump the timing up and stiffer gov spring while you have it out. It a lot easier now, removing all the shims from under the ip gives it @ 11deg.
|
The flexplate came in to mail yesterday so after I drilled the extra three hole I bolted it all together
https://cimg9.ibsrv.net/gimg/www.die...3889e631e5.jpg https://cimg3.ibsrv.net/gimg/www.die...b4d91f8d47.jpg |
| All times are GMT -5. The time now is 02:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands