1976 Ford Courier v2203/t5 swap
#93
#95
I got a little time in welding. thought it would be fun to do it half MIG and half Tig and see how well I do and how easy it is to weld.
this is the Tig, I am not a welder, just for the hobby. I can make items stick together and grind to make it nice.
easy to weld so far. we will see how it holds up to the mig
this is the Tig, I am not a welder, just for the hobby. I can make items stick together and grind to make it nice.
easy to weld so far. we will see how it holds up to the mig
#99
#100
Almost done. I need to make another flange and weld it up and then go back and ad some weld to my low spots and regrind. Its hard to grind the inside angle so I am just gong to lay another bead across with the Tig, more of a cosmetic thing.
I have about 1.5 hours into forming and weld up to this point.
Mig welded parts- not as pretty as the TIG but welded nice still.
Also another project I have been working on. An adapter to put the kubota into a tractor. Kinda funny but its going into a Bombadier J5 here is the first adapter. it is replacing a Chrysler 251 Flathead straight 6.
I have about 1.5 hours into forming and weld up to this point.
Mig welded parts- not as pretty as the TIG but welded nice still.
Also another project I have been working on. An adapter to put the kubota into a tractor. Kinda funny but its going into a Bombadier J5 here is the first adapter. it is replacing a Chrysler 251 Flathead straight 6.