v2203 in 88 s10
#1
v2203 in 88 s10
this is my first post i joined so i could see what all you guys are doing
---AutoMerged DoublePost---
once i figure out how to post pictures i wil put some up of my adapter and modified flywheel and pullys
---AutoMerged DoublePost---
once i figure out how to post pictures i wil put some up of my adapter and modified flywheel and pullys
Last edited by spencxr80; 12-18-2013 at 08:44 AM. Reason: Automerged Doublepost
#6
#7
Nice work! I never thought of welding the plate to the cast bell, but I didn't have that much cast thickness left for my spacing. You seem to have double the spacing I have. I like your belt setup, but the tensioner may not do too good on the torque side of the drive pulley.
#8
im going to try out the water pump before i put another pully on it as far as the tensioner go's there is not alot to work with on the other side for a mounting location and from everything i can tell the bellhousing is cast steel so welding was not a problem but thanks for all of the info thats why i joined