no i dont really have any pics yet but ill try n take some when i put it in. yeah i hear ya im 19 and on a budget too and in college so i dont get to work on it any other than on the weekends. im not sure what im gonna do with the whole situation. im gonna take the cover off on the tunnel where the shifter goes and see if that gives me enough room to play with but i think i may still have some issues back at the tcase. give me ur email and ill see if i can get u some pics. what all have u got done to urs so far?

 

Haven't started since my wheeler is not street legal anymore I got to wait and get everything, how was putting the clutch pedals in that only part I don't wanna do

 

havnt done it yet but its not too much of a worry to me. im more concerned about power steering and brakes because i have absolutly no experience with anything to do with them other than a blown brake line.

---AutoMerged DoublePost---

another idea for the whole tranny clearance issue is a body lift... ive never done one before or know how hard they are but its a thought. idk if a body lift would be enough to cover it though.

 

How was doing the clutch pedal with clutch master cylinder and the cable ran gas pedal

 

i havent done either of those... the cable ran gas pedal will be pretty easy i think. i have one in my parts pile but i need to get a cable. The clutch pedal i dont think will be too bad. the hardest part will be getting up under the dash to mount it. Also, started puting in my body lift today. I got most of the cab done and it hasnt gone to terribly bad and theres definitly gonna be enough room for the tranny now. Definitly worth the money in my opinion.

 

Did you just do one inch body lift from a gasser?

 

I got a 3 inch kit from summit racing. I don't think a 1" would make enough room.