2006 mega cab 4x4
#1
2006 mega cab 4x4
not sure when but I just noticed that the vents or defrost does't have much flo but fan sounds like it is blowing hard but don't matter where you put dial just low flo any ideas on whats wrong and how to fix only have 50,000 mile on it
#4
I pretty sure ur truck doesn't have a cabin filter, I could be wrong?? I would say check the relay for the switch, if good then my guess is that the switch it self is bad, Does it blow hard out of the floor, vent or defrost, like it's stuck on one or the other?
---AutoMerged DoublePost---
If no air flow at all, it most likely will be the blend door is broke off at the pivot point on the electric actuator, it's behind the glove box
---AutoMerged DoublePost---
If no air flow at all, it most likely will be the blend door is broke off at the pivot point on the electric actuator, it's behind the glove box
Last edited by duker; 03-21-2012 at 10:34 PM. Reason: Automerged Doublepost
#7
I checked behind the glove box and when I changed the switch from floor to vent the rod did not move but I got a little air to come out the vent so is it the door or switch
Thread
Thread Starter
Forum
Replies
Last Post
Alaskabound
12 Valve 2nd Gen Dodge Cummins 94-98
4
08-20-2015 07:00 PM
rodbuilder
5.9 Liter CR Dodge Cummins 03-07
2
06-28-2015 08:23 AM
jerm89
5.9 Liter CR Dodge Cummins 03-07
2
02-17-2015 08:19 PM