URgent, 47re rebuilt no gears
#1
URgent, 47re rebuilt no gears
i just put in my trans and it is not shifting to any gear at all.. can anyone help
also rpms do not change from park to to gear
i have 4.5 qts in the triple disc and 7.5qts in trans
its a 97 dodge cummins 4x4
also rpms do not change from park to to gear
i have 4.5 qts in the triple disc and 7.5qts in trans
its a 97 dodge cummins 4x4
#2
My t/c holds 10 liters, and pan has 6 liters. Any on the dipstick? Sounds like you need more oil.
#3
yea when i put my trans back in it didn't do anything and was suckin the fluid down.. it takes a minute for it to get all circulated and when its full it will feel much better
#5
i added four more qts and the rpms dropped a tiny bit in d.2.1. but still no movement i also let it run in nutrual. for about 15min
---AutoMerged DoublePost---
also my dipstick isnt the right one because it seems very short
---AutoMerged DoublePost---
also my dipstick isnt the right one because it seems very short
Last edited by steven-o; 12-12-2010 at 07:50 PM. Reason: Automerged Doublepost
#8
Fully dry A 47re will use close to 17 quarts. More if you have a better Torque Converter or a deep pan.
Mine with a deep pan used almost 2 cases. (12 in a case right?)
Mine with a deep pan used almost 2 cases. (12 in a case right?)