2000 cummins, rattle
OK, I have a 5spd in my truck, and when I let the clutch out after shifting up, 80% of the time there is a rattle noise. This noise also happens if I let off the gas at lower RPM's and coast for a little bit. Any ideas?
I got under the truck and checked everything out and they all seemed fine, it sounds like something is wrapped around the driveline, but I cant find anything.
Update: The noise is coming from under the truck, not engine compartment, I have got that far. Like I said before, while taking off, there is a small click sound, then it sounds like something is wrapping around the axle, then when I get up to speed it goes away. When I left off and get into the lower RPM's, there is a rattle noise for a couple seconds, sounds like metal on metal, then it goes away. I have searched my truck bumper to bumper under neath and can not find the issue.
Update: The noise is coming from under the truck, not engine compartment, I have got that far. Like I said before, while taking off, there is a small click sound, then it sounds like something is wrapping around the axle, then when I get up to speed it goes away. When I left off and get into the lower RPM's, there is a rattle noise for a couple seconds, sounds like metal on metal, then it goes away. I have searched my truck bumper to bumper under neath and can not find the issue.
Last edited by James_M; Oct 16, 2010 at 06:14 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Josh Chretien
5.9L 12V Performance
5
Mar 1, 2015 06:00 AM
gator515
Diesel In Distress - Support Ticket
0
Jan 14, 2015 01:56 PM
6btf350cummins
Diesel In Distress - Support Ticket
0
Dec 16, 2014 07:23 AM
Diesel Bombers
General Diesel Related
0
Oct 31, 2014 08:10 AM




