Diesel In Distress - Support Ticket Need Help ? Broke Down Or in Urgent Need Of Assistance Post Here , Thread Will Be Priority and You have the ability to close your own thread when its fixed . If You Do Not Reply in 10 Days your thread will be closed as we will assume its fixed , You can Reopen YOUR Discussion Topic if you wish .

Redline Issues

Old Sep 19, 2007 | 08:52 PM
  #1  
Lostnwalmart's Avatar
Thread Starter
|
Diesel Bomber
Joined: Mar 2007
Posts: 1,595
Likes: 57
From: Houston Tehas
Default Redline Issues

Ok so ive been having some issues with my second hand reline chip not working properly and giving me random cases of dead pedeal. well i sent it back to blue chip got everything refreshed and fixed on it so the box is ruled out of the equation. I get the box back connect everything and make shure all the coneections are good (soldered to the original wire then a male/female connection to the box) and use alot of elctrical tape. turn on the truck and everthing is going good rev it up and all of a sudden the tac reading is going all over the place (i dont think 9800 rpm is possible)some times its not even a number..... well i take it out and take it for a test drive everything is going good them wham engine is dead... #@$%! i tryed restart it nothing it acts like it getting no fuel, turn the key off then back on and wow first crank no problem, went back to the house confused and angry with the rpm acting haywire agin, any ideas?
 
Old Sep 19, 2007 | 09:05 PM
  #2  
DB Admin's Avatar
Banned
Joined: Mar 2007
Posts: 29,849
Likes: 3,297
From: Perry Co. Ohio
Default

CPS ?

Do you have a CEL ?

Scan your Codes sounds like your Cam Censor Is Haywire ?

DM
 
Old Sep 19, 2007 | 09:05 PM
  #3  
DB Admin's Avatar
Banned
Joined: Mar 2007
Posts: 29,849
Likes: 3,297
From: Perry Co. Ohio
Default

Any Issues W/o the Box?
 
Old Sep 19, 2007 | 09:21 PM
  #4  
Uncle Bubba's Avatar
BOMBARDIER
Joined: Mar 2007
Posts: 12,854
Likes: 1,112
From: Illinois?
Default

Sounds like you need to do the full blown APPS Reset on it. I bet when you check the voltage it is way off the mark.
 
Old Sep 19, 2007 | 09:30 PM
  #5  
Lostnwalmart's Avatar
Thread Starter
|
Diesel Bomber
Joined: Mar 2007
Posts: 1,595
Likes: 57
From: Houston Tehas
Default

with the box off the truck is perfect, apps is .4 to 3.6 volts
 
Old Sep 19, 2007 | 09:31 PM
  #6  
DB Admin's Avatar
Banned
Joined: Mar 2007
Posts: 29,849
Likes: 3,297
From: Perry Co. Ohio
Default

Well that shoots to hell the CPS Did they flash it for the correct year of truck ?

Are you having the same issues You had b4 the reflash
 
Old Sep 19, 2007 | 09:35 PM
  #7  
Uncle Bubba's Avatar
BOMBARDIER
Joined: Mar 2007
Posts: 12,854
Likes: 1,112
From: Illinois?
Default

Originally Posted by Lostnwalmart
with the box off the truck is perfect, apps is .4 to 3.6 volts
How does this relate to the tag on the bottom of the sensor that says what it's supposed to read. Every truck is different so you have to see what your is supposed to be.
 
Old Sep 19, 2007 | 09:36 PM
  #8  
Lostnwalmart's Avatar
Thread Starter
|
Diesel Bomber
Joined: Mar 2007
Posts: 1,595
Likes: 57
From: Houston Tehas
Default

hmm ill have to find the tag and look but that sounds about average.
 
Old Sep 19, 2007 | 09:39 PM
  #9  
Uncle Bubba's Avatar
BOMBARDIER
Joined: Mar 2007
Posts: 12,854
Likes: 1,112
From: Illinois?
Default

The direction for doing this are listed on a thread here and it's pretty quick and simple to do. Mine was quite a ways off when I did it. I was also gettin the occasional dead pedal and seemed low on power. Did this adjustment and dropped the EGT numbers some and haven't had the dead pedal since.
 
Old Sep 19, 2007 | 09:48 PM
  #10  
Lostnwalmart's Avatar
Thread Starter
|
Diesel Bomber
Joined: Mar 2007
Posts: 1,595
Likes: 57
From: Houston Tehas
Default

well if im having low power issues, muhahahahaha and lower egts will be nice but unlikely and where exactly is the tag?
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:56 AM.