sounds just like me, same joints went out in the same order hahaha, good luck

 

Yep Mine has 115,550 miles.
I found the SnapOn tool mentioned earlier, it's a DHP1 and cost $43. Might order one to help with the right side. Plus, people will love me down the road when I let them borrow it.
DHP1, Adaptor, Removal, Wheel Hub, Dodge

 

I did mine yesterday, and had cut the upper ball joint out and remove everything in one piece. I heated mine and had to use a sledge hammer to get it apart. I wish I knew about this site yesterday.

 

I took axle to a shop in Sparta to have ujoint pressed out/in. They cussed these hubs he told me the way he seperates them from the nuckle. He made a piece for his air hammer and works his way around the bolts. Seems like a good idea if you're set up with air hammer already. Says it's still a major PITA.
I'll close this thread down so others get top priority now!