Diesel In Distress - Support Ticket Need Help ? Broke Down Or in Urgent Need Of Assistance Post Here , Thread Will Be Priority and You have the ability to close your own thread when its fixed . If You Do Not Reply in 10 Days your thread will be closed as we will assume its fixed , You can Reopen YOUR Discussion Topic if you wish .

knocking

Old Aug 25, 2009 | 08:36 PM
  #1  
pipelayer4777's Avatar
Thread Starter
|
Diesel Fan
Joined: Aug 2009
Posts: 63
Likes: 1
From: Mastic Beach, NY
Default knocking

My 1990 f superduty with 7.3 is knocking at 3/4 to full throttle. I know it is not a rod or lifter knock. All the clearances have been checked on those items. could it be injector knock, I'm used to diesels with common rail injection and turbo so I'm learning as I go on these non turbo engines. It also Idles at about 850-875 RPM any ideas on that also. Thanks.
 
Old Aug 25, 2009 | 09:04 PM
  #2  
gradyc's Avatar
Diesel Enthusiast
Joined: Apr 2009
Posts: 450
Likes: 45
From: Florida
Default

A bad injector can cause a fuel knock. If you could figure out which cylinder is making the noise you could have that injector tested.

---AutoMerged DoublePost---

One other possibility that has driven me crazy a couple of times is a broken piston skirt. It sort of sounds like a valve noise but is hard to locate. a mechanics stethiscope might help if that is the problem
 

Last edited by gradyc; Aug 25, 2009 at 09:04 PM. Reason: Automerged Doublepost
Old Aug 26, 2009 | 09:47 PM
  #3  
pipelayer4777's Avatar
Thread Starter
|
Diesel Fan
Joined: Aug 2009
Posts: 63
Likes: 1
From: Mastic Beach, NY
Default

Thanks for that bit of advice there, I know as the RPM goes up so does pressure and with pressure comes more noise, so that would make sense to me. how hard are the injectors to pull and replace. I know all about the bleeding and that, just the injector in and out itself. Thanks alot.
 
Old Aug 26, 2009 | 11:38 PM
  #4  
gradyc's Avatar
Diesel Enthusiast
Joined: Apr 2009
Posts: 450
Likes: 45
From: Florida
Default

Like most things now it is more about getting at them than getting them out. After you have taken the injector line and return line T off they just unscrew out of the head. they are on the intake manifold side of the head so there may be wiring or brackets in the way of getting at them. The autozone website has repair manual information for free. All you have to do is register on their site and you can acces the manual online.
 

Last edited by gradyc; Aug 26, 2009 at 11:40 PM. Reason: forgot something
Old Sep 10, 2009 | 10:48 AM
  #5  
stkdram55's Avatar
BOMBARDIER
Joined: May 2008
Posts: 6,548
Likes: 279
From: New Holland Ohio
Default

updates??
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
chootem
1st Generation Dodge Cummins 89-93
2
Jul 18, 2015 08:29 PM
Timglow546
Ford Powerstroke 03-07 6.0L
8
Jun 3, 2015 10:13 PM
jones
Tire, Wheel & Suspension
2
Apr 20, 2015 12:48 AM
jimmer4dat
Diesel In Distress - Support Ticket
1
Apr 11, 2015 01:21 PM
foxboy63
Chevy/GMC 6.2L and 6.5L
4
Nov 6, 2014 01:51 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:47 AM.