OEM Parts Vendors«Diesel Bookmarks The Most Comprehensive Directory For All Things Diesel Related

 

Thanks guys, HERE'S TO YOU! I'll get back in alittle while.

 

I've got two codes. #1 P1693 what does DTC detected in ECM or PCM mean? #2 P500vihicle speed sensor malfunction?

 

P1693 is nothing to worry about, it just means there is a code in the PCM (which a code scanner can read). The P0500 usually means that your rear wheel speed sensor is going out, although it can be a few other things as well. Nothing related to your fueling issues here. Might want to find someone with a code scanner to find out what the code is in the PCM. DTC is Diagnostic Trouble Code and PCM is Power train Control Module

 

Any updates??

 

Thread starter can reopen the thread or start a new one.

 

YOu are a NUT! the hard line nuts only call for 18ft#s of tourque

most likely you have bad orings on the crossovers if the oring bad no amount of tightening will stop the leak. Easy fix IF you havent ruined the crossover tubes and hard lines.

 

Check to see if you took the old gasket off! some times two gaskets does not work good. Does your have a valve that drains the fuel. If so check to see if closed all the way.

 

are you running any chips aftermarket goodies? i know my quadzilla adreniline throws a 0500 all the time in warm up mode. if you do, remove them then try again. just to see if it is the aftermarket goods causing the problem
another thing is to check if the tps/apps voltage isin proper range. its simple to do and take 5 minits to setreset with a buddy or a little longer by your self.
theres a thread on how to do it here some wheere if not pm me and ill give you directions.

i set mine about oncea year just, seems thats about how long it takes to get out of adjustment
just a penny worth of ideas

 

Any luck??