Cummins hard starting
#24
Thanks for getting back to me so quik bill. I went out and tried that again to no avail. I'm not sure how familiar you are with the diablosport predator, but im using this to read live data. I can read all kinds of things. When i look at HPCR Setpoint it never changes. Even when the truck is running. I can watch HPCR Pressure and watch it change in real time
---AutoMerged DoublePost---
If i hold in my trip meter reset and turn the key on, i get some c-codes. It will show like AA 75 or AA 70. What do these mean?
---AutoMerged DoublePost---
I'm also showing a code of P0633. Skim key not saved in PCM. What does this mean?
---AutoMerged DoublePost---
If i hold in my trip meter reset and turn the key on, i get some c-codes. It will show like AA 75 or AA 70. What do these mean?
---AutoMerged DoublePost---
I'm also showing a code of P0633. Skim key not saved in PCM. What does this mean?
Last edited by paulsatala; 03-10-2009 at 05:30 PM. Reason: Automerged Doublepost
#25
Skim key is the key fob. Could be what the problem is. You change out the battery lately or have a 2nd key??
Or you might have to have a dealer reprogram the key fobs to your truck.
One more thing you can try is, remove the Predator completely from the truck. Unhook both batteries for about 15 minutes. Hook em back up, leave the Predator off and see if it starts then.
Or you might have to have a dealer reprogram the key fobs to your truck.
One more thing you can try is, remove the Predator completely from the truck. Unhook both batteries for about 15 minutes. Hook em back up, leave the Predator off and see if it starts then.
Last edited by wildbill; 03-10-2009 at 05:40 PM.
#26
I havent changed the batts, although i prob should. Neither key has any effect. are you refering to the actual keys or the locking, unlocking, alarm device?
---AutoMerged DoublePost---
But why only when the truck is warm?
---AutoMerged DoublePost---
But why only when the truck is warm?
Last edited by paulsatala; 03-10-2009 at 05:42 PM. Reason: Automerged Doublepost
#30
I tried the APPS reset. Did nothing. Truck just spins and spins.
---AutoMerged DoublePost---
If i hold in my trip meter reset and turn the key on, i get some c-codes. It will show like AA 75 or AA 70. What do these mean?
---AutoMerged DoublePost---
If i hold in my trip meter reset and turn the key on, i get some c-codes. It will show like AA 75 or AA 70. What do these mean?
Last edited by paulsatala; 03-10-2009 at 06:00 PM. Reason: Automerged Doublepost