Shot in the dark: Cant get passenger side low beem to work
LMC Truck Parts - Page 24
Let us know how things go.
mishkaya
mishkaya
Actually now that I think about it, I am quite certain that the sport model uses both bulbs and thus requires the two different part numbers. I think you are perfectly safe with the part # I first gave.
mishkaya
Last edited by mishkaya; Jan 4, 2009 at 06:30 PM. Reason: Added info
ok i will call tomorrow and order it. so this will eliminate the other wiring harness i take it? Did u remove it then or what. and will this use the stock headlight switch still?
Sorry for all the question just not to familiar with this deal
Sorry for all the question just not to familiar with this deal
mishkaya
yes sir hope this gives me the low beam fix that I need I will give you an update then
---AutoMerged DoublePost---
UPDATE: Truck is finally fixed. Turned out the be the ground wire that ran from the drivers side to the passengers side in the harness. It was violet and white. Somewhere in that wire it must of freyed apart. tested the ground in each socket at each lamp. Noticed that the passengers side had no ground. Ran a new wire to replace that violet and white under the truck that was bad and everything works now. Thanks for all the help it was much needed
---AutoMerged DoublePost---
UPDATE: Truck is finally fixed. Turned out the be the ground wire that ran from the drivers side to the passengers side in the harness. It was violet and white. Somewhere in that wire it must of freyed apart. tested the ground in each socket at each lamp. Noticed that the passengers side had no ground. Ran a new wire to replace that violet and white under the truck that was bad and everything works now. Thanks for all the help it was much needed
Last edited by Turbohunter; Jan 5, 2009 at 04:32 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post




