6.5 turbo
#1
6.5 turbo
I have a 1998 silverado 3500 with a 6.5 turbo. I run a wvo kit in it and have had to replace a few ip's. I believe that I may have other issues with the truck. It coughs black smoke and hitches/loses power under load. I ran a scan for codes and came up with these...
p0113
p0216
p0238
p1214
p1218
After reading some similar posts in the forum, I decided to check the vaccum to my actuater- there is none!
I cleared the codes and did a key on,key off reset of the injection pump timing, and took it for a run. It runs a bit better, but still came up with the code p1218. These last two codes are not in my code book.
plz help
these issues are running on diesel- it wont run on veg
p0113
p0216
p0238
p1214
p1218
After reading some similar posts in the forum, I decided to check the vaccum to my actuater- there is none!
I cleared the codes and did a key on,key off reset of the injection pump timing, and took it for a run. It runs a bit better, but still came up with the code p1218. These last two codes are not in my code book.
plz help
these issues are running on diesel- it wont run on veg
Last edited by lefty259; 05-16-2013 at 07:40 AM. Reason: clarity
#2
the p1218 you refer to is injection pump calibration circuit..might want to do a google search and see if there is any more info....scott
the p1214 is injection pump timing offset..hope this helps...
the p1214 is injection pump timing offset..hope this helps...
Last edited by j johnson; 05-16-2013 at 06:06 PM.
Thread
Thread Starter
Forum
Replies
Last Post
klein444
Chevy/GMC 6.2L and 6.5L
3
02-27-2015 01:53 PM