6.5 turbo
I have a 1998 silverado 3500 with a 6.5 turbo. I run a wvo kit in it and have had to replace a few ip's. I believe that I may have other issues with the truck. It coughs black smoke and hitches/loses power under load. I ran a scan for codes and came up with these...
p0113 p0216 p0238 p1214 p1218 After reading some similar posts in the forum, I decided to check the vaccum to my actuater- there is none! I cleared the codes and did a key on,key off reset of the injection pump timing, and took it for a run. It runs a bit better, but still came up with the code p1218. These last two codes are not in my code book. plz help these issues are running on diesel- it wont run on veg |
the p1218 you refer to is injection pump calibration circuit..might want to do a google search and see if there is any more info....scott
:tu: the p1214 is injection pump timing offset..hope this helps... |
I will put another Pmd on it. I have a spare
|
tried a new pmd but still the same. Its starting real hard now
|
All times are GMT -5. The time now is 09:39 AM. |
© 2024 MH Sub I, LLC dba Internet Brands