Diesel In Distress - Support Ticket Need Help ? Broke Down Or in Urgent Need Of Assistance Post Here , Thread Will Be Priority and You have the ability to close your own thread when its fixed . If You Do Not Reply in 10 Days your thread will be closed as we will assume its fixed , You can Reopen YOUR Discussion Topic if you wish .

Ghost ignition problem

Thread Tools
 
Search this Thread
 
  #1  
Old 01-01-2013, 04:50 PM
Alaska Mike's Avatar
Newbie
Thread Starter
Join Date: Jan 2013
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default Ghost ignition problem

I recently purchased a 2006 Dodge, 3500 Mega Cab with a 5.9 Cummins engine. It has an intermitten electrical problem that my dealer is having a tough time solving. The engine starts and runs fine, but while driving loses all electrical functions (dies) for a split second. If at a stopped psotion it will die completely, but restarts easily. If driving, the tach drops to zero, but then resumes in a split second. If on cruise control, it clears it and has to be reset. I've replaced several of the sensors, such as the Temperature, Fan Clutch and Transmission Range sensors, but the problem continues. I've also noticed the lights will blink off and then right back on every once in a while. Has anybody else had such a problem? All suggestions would be appreciated. By the way, the truck has only 40,500 miles, but is off warrenty due to age..... Alaska Mike
 
  #2  
Old 01-01-2013, 08:18 PM
cummin_un_glued's Avatar
FormerVendor
iTrader: (1)
Join Date: Mar 2007
Location: Ash Flat Arkansas
Posts: 1,748
Received 107 Likes on 99 Posts
Default

we had a truck in that was loosing the crank sigal ramdomly and it turned out to the the ecm ground. that would be the first place i would look.
 
  #3  
Old 01-01-2013, 09:14 PM
Alaska Mike's Avatar
Newbie
Thread Starter
Join Date: Jan 2013
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default Ghost ignition problem

I'll have that checked out... Thanks for the tip!!
 
  #4  
Old 01-01-2013, 09:47 PM
mysterync's Avatar
Diesel Bombers Sponsor
Join Date: Mar 2007
Location: Blowing Rock,NC
Posts: 3,791
Received 367 Likes on 251 Posts
Default

I think i would set a scope up on my pcm or ecm power circuits and ground circuits. If you find a issue when the truck dies it will give you direction. Ive had asd relay contacts burn up and have intermittent power loss. Unless they've got a scope on the truck these can be very difficult to find. A scope will be your best friend

Sent from my DROID RAZR using Tapatalk 2
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
burndiesel
24 Valve 2nd Gen Dodge Cummins 98.5-02
10
02-07-2023 01:15 AM
jeremy01995
12 Valve 2nd Gen Dodge Cummins 94-98
1
09-14-2015 06:34 PM
david.burger
Diesel In Distress - Support Ticket
2
05-30-2015 08:25 AM
Diesel Bombers
Latest Automotive Industry News
0
03-13-2015 09:20 AM
Diesel Bombers
Latest Automotive Industry News
0
10-14-2014 03:30 PM



Quick Reply: Ghost ignition problem



All times are GMT -5. The time now is 04:52 PM.