Duramax Flame Thrower
#1
Duramax Flame Thrower
Thanks to PFrog at DP for the stack fun.
Here are some pics of my stack during flame testing.
-WARNING AND DISCLAIMER-
I have had alot of questions about how I did it, and I will provide more information about the parts I used if you PM me.
You can see in the picture that it consists of:
2 champion RC12YC
2 Anti fouling spark plug fittings
60 psi adjustable LP regulator
12v LP lockoff solenoid - from alternative fuels
1/2 " and 3/16 " brake line
a bunch of brass fitings
1/2" LP rubber hose
(need to increase ignitor power)
Note: the flames you see are all at idle, even with ALOT of propane the truck will blow out the flames if you hit the throttle (no oxygen)
I would not recommend trying this while driving, only stopped at an idle!
Here are some pics of my stack during flame testing.
-WARNING AND DISCLAIMER-
I have had alot of questions about how I did it, and I will provide more information about the parts I used if you PM me.
You can see in the picture that it consists of:
- high pressure regulator
- 12v lock-off solenoid
- high voltage ignitor
- some spark plugs and brake line
- Pure Stupidity!
2 champion RC12YC
2 Anti fouling spark plug fittings
60 psi adjustable LP regulator
12v LP lockoff solenoid - from alternative fuels
1/2 " and 3/16 " brake line
a bunch of brass fitings
1/2" LP rubber hose
(need to increase ignitor power)
Note: the flames you see are all at idle, even with ALOT of propane the truck will blow out the flames if you hit the throttle (no oxygen)
I would not recommend trying this while driving, only stopped at an idle!
Last edited by DangerousDuramax; 02-13-2008 at 09:02 AM.
The following 3 users liked this post by DangerousDuramax:
#2
#3
#4
#5
#6
#10