Chevy/GMC Truck and Duramax Turbo Diesel Forum Discussion of General Topics related to All Chevy and GMC Trucks as well as the Diesels in them

Calling out Dan-o the man-o

Old Oct 30, 2008 | 06:31 PM
  #161  
stkdram55's Avatar
BOMBARDIER
Joined: May 2008
Posts: 6,548
Likes: 279
From: New Holland Ohio
Default

 
Reply
Old Oct 30, 2008 | 07:49 PM
  #162  
TxChristopher's Avatar
Diesel Fan
Joined: Aug 2008
Posts: 21
Likes: 2
Default

We ran Danny's truck with my G-Tech Pro RR and it showed within a tenth of his track quarter mile and dead on mph, and its dyno plot said 374 horsepower, which is really close to what the actual dyno said.

I do believe that Danny can find a lot of power if he can get the rail pressure up, if I were him that's the next thing to do on his truck. Still, his numbers came in close to what I dyno'd using the McRat tune on my truck and I maintain 21,000 on that.

It was a good time, I recommend more friendly "shootouts" which will only serve to keep lifting the performance bar for everyone.
 
Reply
Old Oct 30, 2008 | 09:01 PM
  #163  
LeadfootDuramax's Avatar
Diesel Wrench
Joined: Dec 2007
Posts: 971
Likes: 41
From: Houston, Tx
Default

Hey Chris, was this done with your headers and up-pipes on?? I would be very interested in seeing the difference they make on a highly tuned truck.
 
Reply
Old Oct 30, 2008 | 11:04 PM
  #164  
Diesel-N-Dust's Avatar
Diesel Bomber
Joined: Apr 2007
Posts: 1,283
Likes: 58
From: Cypress, Texas
Default

So when did this go down? I wish I could have been there to see it.
 
Reply
Old Oct 30, 2008 | 11:47 PM
  #165  
2500HeavyDuty's Avatar
Super Moderator
Joined: Oct 2007
Posts: 14,872
Likes: 764
From: Houston, Tx
Default

Originally Posted by TxChristopher
Danny did 380 hp and 880 ft/lbs

I did 440 hp and 1069 ft/lbs
Um no... i did 382.1 Hp and 879 ft/lbs with the tune i wrote.
With Mcrats 500Hp tune i pulled 366 Hp and 858 ft/lbs
and with anther 500hp tune by Wildman i pulled 357 hp and 810 ft/lbs

get it right

Originally Posted by DieselMinded
i knew my cp3 was bad, but not that bad

Originally Posted by RSWORDS
Just got off the phone with Danny... He has stopped crying now....

He said that his CP3 would only put out about 16k-17k psi... Thats sucks...

GOOD RUN CHRIS!!!
Yeah i asked Russel since he had his Tech II with him if he could hook it up and test my injector pump. The pump could not even keep up with the demands for a stock LB7 motor time to replace it.

Originally Posted by Oilfield_Mafia
That sucks that his CP3 wasnt workin right.. plus a lil birdie told me the other day that his HG is leaking as well..

x@ on the awesome pull Chris.. !
Nope no HG, just a scare, i gotta figure out what made my coolant reservoir black

Originally Posted by Red_Rattler
I WIN! Sucks about the cp3 and HG though.... We should do some more dyno challenges! Any vids!?!
Russel has pics, but hes out huntin he will be back Monday or sat night.

Originally Posted by TxChristopher
We ran Danny's truck with my G-Tech Pro RR and it showed within a tenth of his track quarter mile and dead on mph, and its dyno plot said 374 horsepower, which is really close to what the actual dyno said.

I do believe that Danny can find a lot of power if he can get the rail pressure up, if I were him that's the next thing to do on his truck. Still, his numbers came in close to what I dyno'd using the McRat tune on my truck and I maintain 21,000 on that.

It was a good time, I recommend more friendly "shootouts" which will only serve to keep lifting the performance bar for everyone.
That dyno and that G-Tech are crazy accurate. I already knew your truck was gonna put higher numbers since wednessday when we were talking about tuning and what kind of rp u can hold with that pw. your cp3 kicks my cp3's ***

when i replace my cp3 rematch fo sure...loser pays?

Originally Posted by LeadfootDuramax
Hey Chris, was this done with your headers and up-pipes on?? I would be very interested in seeing the difference they make on a highly tuned truck.
Remember that little mod that chris was talking about he wanted to test out?

first thing i noticed when he popped his hood was the damn race headers he installed the day before

Originally Posted by Diesel-N-Dust
So when did this go down? I wish I could have been there to see it.
this was down near stafford by the belt and 59. engine logistics was the name.
 
Reply
Old Oct 31, 2008 | 12:06 AM
  #166  
Diesel-N-Dust's Avatar
Diesel Bomber
Joined: Apr 2007
Posts: 1,283
Likes: 58
From: Cypress, Texas
Default

I meant what day! I asked WHEN, NOT WHERE!
 
Reply
Old Oct 31, 2008 | 12:08 AM
  #167  
2500HeavyDuty's Avatar
Super Moderator
Joined: Oct 2007
Posts: 14,872
Likes: 764
From: Houston, Tx
Default

Thursday 10-30-08
 
Reply
Old Oct 31, 2008 | 11:36 AM
  #168  
LeadfootDuramax's Avatar
Diesel Wrench
Joined: Dec 2007
Posts: 971
Likes: 41
From: Houston, Tx
Default

A poosibility on your coolant reservoir could be that someone has mixed green and red coolant. Newer coolants are supposed to be mixed, but original version did not mix and turned black. They could also get like tar and screw a bunch of stuff up.
 
Reply
Old Nov 1, 2008 | 07:53 PM
  #169  
Rttoys's Avatar
Thread Starter
|
Diesel Bomber
Joined: May 2007
Posts: 1,221
Likes: 126
From: Houston, TX
Default

Just wanted to personally thank everyone who put me in the top 10 list of casino cash. :upup:

a 3000% return on my money isn't too shabby...



CP3 ?? Your's was modded TxC's was stock......
Now it's time to upgrade and play again sometime
 
Reply
Old Nov 1, 2008 | 08:05 PM
  #170  
Rttoys's Avatar
Thread Starter
|
Diesel Bomber
Joined: May 2007
Posts: 1,221
Likes: 126
From: Houston, TX
Default

Here's a few pics
 
Attached Thumbnails Calling out Dan-o the man-o-dsc00864.jpg   Calling out Dan-o the man-o-dsc00860.jpg   Calling out Dan-o the man-o-dsc00767.jpg   Calling out Dan-o the man-o-dsc00773.jpg   Calling out Dan-o the man-o-dsc00774.jpg  

Calling out Dan-o the man-o-dsc00869.jpg  
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:16 AM.