Chevy/GMC Duramax 07.5 -10 LMM Discussion of Chevy and GMC Trucks with LMM Duramax Turbo Diesel Engines

Questions on Batterys going dead, I-Arm, Tranny cooling lines

Thread Tools
 
Search this Thread
 
  #1  
Old 12-13-2010, 09:31 PM
Dirtymax13's Avatar
Newbie
Thread Starter
Join Date: Dec 2010
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default Questions on Batterys going dead, I-Arm, Tranny cooling lines

First problem is batterys, If my truck sits for any lenth of time it either starts hard or is dead if i run my radio without running 20 mins max dead alternator good batterys test good, Second I-Arm for steering rattels when turning i have seen other post about this where would i buy a new aftermaket one ,cause i heard factory will do the same thing again, Third my tranny cooling lines have been replaced once already and a diferent one is leaking now 50,000 wtf
 
  #2  
Old 12-14-2010, 01:37 PM
BriteWhiteRam's Avatar
Diesel Bomber
Join Date: Mar 2009
Location: Alberta, Canada
Posts: 1,070
Received 66 Likes on 61 Posts
  #3  
Old 12-14-2010, 02:37 PM
2500HeavyDuty's Avatar
Super Moderator
Join Date: Oct 2007
Location: Houston, Tx
Posts: 14,872
Received 764 Likes on 627 Posts
Default

your going to have to pull the amp meter out and test for any unwanted battery drain with the truck off.

do you have any aftermarket electronics installed?
 
  #4  
Old 12-22-2010, 02:20 PM
BLACKDX's Avatar
BOMBARDIER
Join Date: Aug 2008
Location: Red Deer Alberta
Posts: 189
Likes: 0
Received 4 Likes on 4 Posts
Default

Just do what BWR said or take your lines of and go to a hose shop on get some real ends and hose made up.. They will never stop leaking especially if your in a colder climate..As for the Batt ya must have a drain on it some where, I know mine won't handle much as well but its only sometimes. I think if something is left on plugged in it must activate the BCM or something cuz mine has did this as well..the only thing i had plugged in was a phone plug. I know with my PPE sometimes I could never load a tune it would lock up, had to unplug several times and reastart the truck ans so on. Was told by PPE that if the BCM stays powered up that that would cause issues with the programming.. Dunno
 
  #5  
Old 12-22-2010, 10:41 PM
Dirtymax13's Avatar
Newbie
Thread Starter
Join Date: Dec 2010
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks for your help
 




All times are GMT -5. The time now is 03:49 AM.