What kind of mpgs you guys getting
#31
try starting your cummins in -40c without being plugged in, I KNOW I can start my DMAX at that temp, I have personally done it on several occasions, as for towing, mileage and torque, I will match and surpass you on ever single one of those so please take your trolling BS out of this thread
#32
I have a 99 cummins and I usually have it plugged in but it will start in -40* temps. I have an afe stage 2 intake MBRP 4" exhaust and an edge comp box. I just put the bombs on recently and average 21 MPG right now with about 60% city 40% highway and have been known to do some spirited driving. I get the 21 MPG even with letting my truck warm up for at least 15 minutes in the winter and in the summer I usually get 3 or 4 mpg better.
Oh and comp box usually set to 3
Oh and comp box usually set to 3
#33
The following users liked this post:
ducatinutzs (07-13-2013)
#34
and my friends 97 PS has never gotten better than 13mpg who cares? the question is what kinda fuel mileage does your duramax get.
#35
26 hand calculated? but you see like brightwhiteram said, you cummins guys have to do exhaust, intake, chip, cold air, and all that to even see 300hp. dmax only has to get efilive to get those numbers and more.
it usually sees 450-500hp with little to no issues. mine has only had a fan clutch sieze up but that can happen to any engine anytime!
it usually sees 450-500hp with little to no issues. mine has only had a fan clutch sieze up but that can happen to any engine anytime!
#36
1.) powermax programmer (max +190rwhp)
2.) exhaust
3.) cold air intake
4.) turbo
to put down 466/1250..
how much did the new transmission cost?
ps. thats a lot of work to gain 100hp and 600ftlb on my truck stock....
Last edited by Budgreen; 01-12-2012 at 03:53 PM.
#37
I can get 475rwhp from my truck with about 10 mins of loading a new tune, nothing else.......
It would need a transmission upgrade if i abused it too much but its entirely possible to drive it like that for a long time on the stock trans before it needs work
to get 500rwhp i would need a lift pump, and a trans upgrade and I would be there all day
It would need a transmission upgrade if i abused it too much but its entirely possible to drive it like that for a long time on the stock trans before it needs work
to get 500rwhp i would need a lift pump, and a trans upgrade and I would be there all day
#38
well all i had to put in was a clutch, powermax is not that aggressive of a chip and the other stuff is just minor, but cummins people never had the efi live to work with like you duramax people for to long 03 and up cummins will have them and i said this because you said exhuast, chip, and cai was needed to see 300 well your wrong and that was on the dyno at scheid not the dyno jet, i took the powermax off this year and ran the smarty and came in 7th for torque and 8th for hp with hardly anything done it made 491 and 1240 ftlb tq out of every truck that went on scheids dyno there was 2 chevys and 8 dodges in the top 10, just look on scheids dyno results for saturday
Last edited by 6spd; 01-18-2012 at 09:13 AM.
#40
ya the only big duramax that i know of that is toward the top everytime is the cummins killer which i have to say is very well built and is almost a piece of artwork i do like to see that truck pull and appreciate the work thats put into it, but i didn get on here to get in a pi$$ing match i was jus proving a point that cummins and duramax are equal competitors its just whoever has the most money to put in there truck, saying that no offense to powerstrokes but i usually dont expect much more out of a ford than to look good